Molds & Round Balls

Round Balls	Lyman Moulds
Lee Round BALL MOLDS	Lyman Products
Lee R-E-A-L Conical Bullet Molds	Lead Pot
Lee Minie Bullet Molds	T/C Products
Lee Products	BUFFALO ROUND BALLS

Round Balls
			Muzzleloading & More, Ent. Cast round balls for Muzzleloading. Packaged 100 per package, except .575 and .600 & .610 has 50 per package. " CURRENTLY NOT AVAILABLE "
CALIBER	PART NUMBER	PRICE	CALIBER	PART NUMBER	PRICE
.350	00-36350RB		.530	00-54530RB
.457	00-44457RB		.535	00-54535RB
.440	00-45440RB		.575	00-58575RB
.490	00-50490RB		.600	00-62600RB
.495	00-50495RB		.610 00-62610 SEE HORNADY BELOW
			Hornady Round Ball Round Balls use a precise swaging process that eliminates air pockets and sprues. Consistent roundness and weight give a more accurate flight. Packaged 100 per package, except .570 has 50 per package.
CALIBER	PART NUMBER	PRICE	CALIBER	PART NUMBER	PRICE
.310	0180-310	$10.00	.454	0180-454	$13.60
.315	0180-315	$10.00	.457	0180-457	$14.25
.350	0180-350	$10.00	.490	0180-490	$14.90
.375	0180-375	$10.00	.495	0180-495	$14.95
.395	0180-395	$11.20	.520	0180-520	$16.25
.433	0180-433	$13.35	.530	0180-530	$17.60
.440	0180-440	$11.85	.535	0180-535	$18.05
.445	0180-445	$13.60	.570	0180-570	$10.40
.451	0180-451	$13.60	BUFFALO SWAGED ROUND BALL .600 .62 CAL. PART #1200600 $14.60 PER 50 .610 .62 CAL. PART #1200610 $14.80 PER 50

MAKE YOUR OWN ROUND BALL OR BULLETS FROM MOLDS BELOW....

Top Secure Order Form

" NOTE " MOST LEE SINGLE CAVITY ROUND BALL MOLDS ARE BEING

DISCONTINUED & REPLACED BY DOUBLE CAVITY MOLDS.

Lee Round Ball Molds
NOTE:... MOST LEE SINGLE CAVITY MOLDS ARE BEING DISCONTINUED AND REPLACED BY .............DOUBLE CAVITY MOLDS.... WE STILL HAVE SEVERAL OF THE SINGLE CAVITY MOLDS. " IN MOST CASES THE PART NUMBER WILL REMAIN THE SAME. EXAMPLE: A .350 DOUBLE CAVITY MOLD WILL BE 0190-415.			Lee round ball molds have a tangential cut-off which eliminates the objectionable nib at the sprue. The cavities are made with a new process called hobbing. The blocks are rough machined to size with about .005 to .010 inch stock remaining. A tungsten carbide ball is then placed in the cavity and the blocks are squeezed in a 30-ton press to perfectly form the round cavity. The resulting cavity is far smoother and round than could be cut with a conventional cutter. Lee molds include handle.
	Single Cavity			Double Cavity
.308 Round Ball Mold	0190-407	$23.00		********
.311 Round Ball Mold	0190-408	$23.00		0190-406	$27.00
.319 Round Ball Mold	0190-410	$23.00		********
.330 Round Ball Mold	N/A	N/A		********
.350 Round Ball Mold	0190-415	$23.00		********
.360 Round Ball Mold	0190-418	$23.00		********
.375 Round Ball Mold	0190-419	$23.00		0190-420	$27.00
.380 Round Ball Mold	0190-422	$23.00		0190-423	$27.00
.390 Round Ball Mold	0190-424	$23.00		********
.395 Round Ball Mold	0190-425	$23.00		********
.400 Round Ball Mold	0190-400C	$25.00		********
.433 Round Ball Mold	********			0190-432	$27.00
.440 Round Ball Mold	0190-435	$23.00		0190-436	$27.00
.445 Round Ball Mold	0190-437	$23.00		0190-438	$27.00
.451 Round Ball Mold	0190-439	$23.00		0190-440	$27.00
.454 Round Ball Mold	0190-441	$23.00		0190-442	$27.00
.457 Round Ball Mold	0190-443	$23.00		0190-444	$27.00
.490 Round Ball Mold	0190-447	$23.00		0190-448	$27.00
.495 Round Ball Mold	0190-449	$23.00		0190-450	$27.00
.498 Round Ball Mold	0190-451	$23.00		********
.500 Round Ball Mold	0190-452	$23.00		********
.527 Round Ball Mold	0190-453	DISCONTINUED		********
.530 Round Ball Mold	0190-454	$23.00		0190-283	$27.00
.535 Round Ball Mold	0190-455	$23.00		0190-456	$27.00
.562 Round Ball Mold	0190-459	$23.00		0190-460	$27.00
.575 Round Ball Mold .600 Round Ball Mold	0190-461 0190-975	$23.00 $27.00		********

Top Secure Order Form

LEE R-E-A-L CONICAL BULLET MOLDS (Rifling-Engraved-At-Loading)
A solid flat based bullet that loads easily, even after many firings. Will not tumble. A perfect hunting bullet with heavy loads. All R-E-A-L conical bullet molds come complete with handles
.45 cal.	200 GRAIN	double cavity	0190-390	$27.00
.45 cal.	250 GRAIN	single cavity	0190-391	$27.00
.45 cal.	250 GRAIN	double cavity	0190-392	$27.00
.50 cal.	250 GRAIN	single cavity	0190-393	$27.00
.50 cal.	250 GRAIN	double cavity	0190-394	$27.00
.50 cal.	320 GRAIN	single cavity	0190-395	$27.00
.50 cal.	320 GRAIN	double cavity	0190-396	$27.00
.54 cal.	300 GRAIN	single cavity	0190-397	$27.00
.54 cal.	300 GRAIN	double cavity	0190-398	$27.00
.54 cal.	380 GRAIN	single cavity	0190-399	$27.00
.54 cal.	380 GRAIN	double cavity	0190-400	$27.00
.58 cal	440 GRAIN	single cavity	0190-403	$27.00
.58 cal.	440 GRAIN	double cavity	0190-404	$27.00

Special Combination Round Ball and Conical Bullet MOLD
.45 cal.	********	double cavity	0190-405	$29.00
.50 cal.	********	double cavity	0190-488	$29.00

Top Secure Order Form

Lee Minie Bullet Molds
			The Lee minie bullet mold has an automatic core pin making it easy to cast 200 minies per hour. Open the mold upside down to empty. Close it and you are ready to cast the next. A quality mold built to last as long as your muzzle loader. All minie molds are single cavity.
45 Cal. Minie, 294 grain	0190-467	$27.00	54 Cal. Minie, 415 grain (oversize)		0190-474	$27.00
45 Cal. Minie, 298 grain (oversize)	0190-469	$27.00	58 Cal. Minie, 472 grain		0190-476	$27.00
50 Cal. Minie, 354 grain (Target Minie)	0190-471	$27.00	58 Cal. Minie, 470 grain (Target Minie)	0190-475		$27.00
50 Cal. Minie, 360 grain	0190-472	$27.00	58 Cal. Minie, 478 grain (oversize)	0190-478		$27.00
54 Cal. Minie, 410 grain	0190-473	$27.00	58 Cal. Minie, 500 grain (Original Size)	0190-481		$27.00

Top Secure Order Form

Lee Products
		Lead Pot Flat bottom drawn steel is very stable. Pot holds 4 lbs of lead.
		Lead Pot	0190-027	$6.95
	Lee Pro 4-20 Large diameter high capacity pot, holds approximately 20 pounds of lead. This second generation design incorporates the famous LEE patented high-efficiency design and dependable remote sensing thermostat, now in a dust tight housing. 700-watt heating element assures quick melting and rapid recovery.
	Pro 4-20 20 Lb. Pot		0190-947	$92.00
	Lee Production Pot IV This lead melting pot is the same as the standard Production Pot except it has four inches of clearance under the spout instead of two inches. This is high enough to accept all brands of bullet molds and most sinker molds.
	Production Pot IV		0190-009	$76.00
	Lee Production Pot Large, deep pot holds approximately 10 pounds of lead. Melt time is less than 20 minutes. Pour spout up front where it belongs so you can see what you’re doing. Infinite heat control. Uses only 500 watts of power during heat-up and a lot less to maintain temperature. Large, stable base for safety.
	Production Pot		0190-022	$66.00
	Lee Ingot Mold Use the Lee ingot mold to cast ½ and 1 pound ingots. Perfect for remelting and alloying. Wood handle stays cool. Aluminum mold is lightweight and rustproof.
	Ingot Mold		0190-029	$16.95
	Lee Lead Ladle A convenient size ladle for bullet casting. Works equally well for right and left handers. Handy for skimming and stirring metal.
	Lead Ladle		0190-026	$6.50

Top Secure Order Form

Lyman Molds
			Lyman Bullet Moulds Lyman moulds are the standard by which all other molds, regardless of price, are judged. Their standard offering of proven, popular designs is the widest available. Lyman molds are machined from solid steel blanks for long relable service. Depending on bullet design and size, Lyman mold blocks are available in single and double cavity. Mold blocks and handles are sold separately. Lyman’s improved handle is made from ductile iron with large hardwood handles that provide a cool, secure grip. Handles are available in two different sizes - small handles for single cavity blocks, and large handles for double cavity blocks. NOTE: MOST NEW MOLDS REQUIRE LARGE HANDLES.
Small Mold Handles MOLD HANDLES WILL BE OBSOLETE WHEN STOCK GONE	0166-001	N/A		Large Mold Handles	0166-002	$42.50

Single Cavity Molds				Double Cavity Molds
.375 Round Ball Mold	********			0166-2-375		$79.95
.440 Round Ball Mold	********			0166-2-440		$79.95
.445 Round Ball Mold	********			0166-2-445		$79.95
.451 Round Ball Mold	********			0166-2-451		$79.95
.454 Round Ball Mold	********			0166-2-454		$79.95
.457 Round Ball Mold	********			0166-2-457		$79.95
.490 Round Ball Mold	********			0166-2-490		$79.95
.495 Round Ball Mold	********			0166-2-495		$79.95
.500 Round Ball Mold	0166-1-500	$79.95		********
.530 Round Ball Mold	0166-1-530	$79.95		********
.535 Round Ball Mold	0166-1-535	$79.95		********
.570 Round Ball Mold	0166-1-570	$79.95		********
.575 Round Ball Mold	0166-1-575	$79.95		********
.600 Round Ball Mold	0166-1-600	$79.95		********
.610 Round Ball Mold	0166-1-610	$79.95		********
.662 Round Ball Mold	0166-1-662	? avail.		********
.690 Round Ball Mold	0166-1-690	$79.95		********
.715 Round Ball Mold	0166-1-715	$79.95		********
.735 Round Ball Mold	0166-1-735	$79.95		********

Top Secure Order Form

Lyman Products
	Lyman Ingot Mold This ingot mold is useful when melting down scrap lead or when making alloys. Mold forms four, easy-to-use ingots that stack easily. Made of cast iron.
	Ingot Mold	122837794	$23.95
	Lyman Lead Ladle Dipper has cast iron head and is shaped for easy, accurate pouring. Design prevents air pockets and floating impurities from entering the cast bullet. Wood handle stays cool.
	Casting Dipper	122867790	$22.50
	Lyman Lead Pot Lead melting pot with flat bottom for any source of heat. Total capacity is 8 lbs. of lead.
	LEAD POT	122867791	$18.50

Top Secure Order Form

Lead Pot
	Lead Pot 24 LB. Capacity This cast iron pot holds 24 lbs. of lead for the volume caster.
	Lead Pot ( 24 LB. )	0135-10	N/A

Top Secure Order Form

T/C Products
			Tho-mpson/Center Maxi Ball T/C’s original Maxi-Ball has been used extensively by target shooters and hunters for almost 20 years. Its reputation as an exceptionally accurate bullet which is easily loaded in the field is unequaled. A variety of weights are available that should fit the needs of most hunters. Pre-lubed
20 Per Box
45 Caliber Maxi-Ball 240 Grain-"1000" Lube	0122-7794	$15.70	54 Caliber Maxi-Ball 365 Grain-"1000" Lube	0122-7896	DISCONTINUED SOLD OUT
50 Caliber Maxi-Ball 320 Grain-"1000" Lube	0122-7895	$15.10	54 Caliber Maxi-Ball 430 Grain-"1000" Lube	0122-7796	$16.35
50 Caliber Maxi-Ball 370 Grain-"1000" Lube	0122-7795	$16.00	54 Caliber Maxi-Ball 530 Grain-"1000" Lube	0122-7696	DISCONTINUED
15 Per Box
58 Caliber Maxi-Ball 555 Grain-"1000" Lube	0122-7797	$18.00	********
			Thompson/Center Maxi-Hunter T/C’s new CAD designed Maxi-Hunter bullet incorporates features of the world famous Maxi-Ball, superb accuracy and easy loading, with the added benefit of maximum expansion on deer sized game. A variety of weights are available that should fit the needs of most hunting needs. Pre-lubed with "1000 lube."
20 Per Box
45 Caliber Maxi-Hunter 255 Grain-"1000" Lube	0122-7784	$15.70	54 Caliber Maxi Hunter 360 Grain-"1000" Lube	** 0122-7886	DISCONTINUED SOLD OUT.
50 Caliber Maxi-Hunter 275 Grain-"1000" Lube	0122-7885	$15.10	54 Caliber Maxi Hunter 435 Grain-"1000" Lube	0122-7786	$16.00
50 Caliber Maxi-Hunter 350 Grain-"1000" Lube	0122-7785	$14.90	54 Caliber Maxi Hunter 540 Grain-"1000" Lube	** 0122-7686	DISCONTINUED SOLD OUT
15 Per Box
58 Caliber Maxi-Hunter 560 Grain-"1000" Lube	0122-7790	$19.00	** ( OUT OF PRODUCTION)

.58 CALIBER MAXI-BALL

0122-7797

555 GRAIN $19.00

Secure Order Form

Top